Instructions / Assembly

6
ASSEMBLY INSTRUCTIONS
Hardware Used
2
2. Attach three Support Brackets (I) loosely to Base with
three Bolts M8 x 16 (AA) downward through Support
Brackets into the Base.
AA
Bolt M8 x 16
x 3
AA
I
H
Hardware Used
1. Flip the base (J), fix the Ground Fixtures (LL) to the
base with two Bolts M6 x 10 (MM) and two Washers Φ6 (GG),
Secure the Ground Fixtures (LL) with two Nuts M6 (NN). Fix
another two Ground Fixtures (LL) with bolts and nuts, and
flip the Base (J).
OO
x 1
Wrench
1
J
MM
LL
NN
GG
x 6
x 6
x 6
x 3
LL
MM
GG
NN
Bolt M6 x 10
Ground Fixtures
Washer Φ6
M6 Nut
3
3. Install Lower Pole (H) onto three Support Brackets.
Attach Pole to Support Brackets using six Bolts
M6 X 30 (DD) & six M6 Flange Nuts (BB). Fully tighten
all of the screws.
BB
x 6
M6 Flange Nut
DD
Bolt M6 x 30
x 6
Hardware Used
DD
BB