Use and Care Manual

ASSEMBLY INSTRUCTIONS
1. First please ensure all transit protection
(foam, cardboard, bubble wrap, etc.) is
removed. Carefully put the ruby quartz glass
tube aside after removing the bubble wrap
and foam material .Then install emitter to
reflector with Nut M8
①
and
②
as shown in
picture
1
Top portion
eBottom pan ls
Wheel kit
Base plate
2. Remove three protective steel guards
Hardware Used
2
Top View
Nut M8
Qty.
9
Wrench
Qty. 1
Philips screwdriver
Qty. 1
7
Hardware Used