Instructions / Assembly

Assembling Process for wall mount

Preparation stage:

Please remove the four M6*10 Screws on the heater, and use them

for Step 2

Step 1: Assemble the bracket. (③,

○

4 ,⑥,⑦,⑧)

Do not tighten the four M6*10 screws ③, reserve 2-3 mm of gap for

step 4.

Step 2: Install the bracket on the back of the heater.

Adjust the four sliders inside the track to the middle of the heater.

Attach the bracket which you assembled in step 1 with four M6*10

screws

○

3 , tighten them with ‘L ‘hexagonal wrench

○

10 。

Step 3: Fix bracket part 1

○

1 on the wall, tighten the four nuts (a part

of anchor bolt M6*50)

○

2 with M6 spanner

○