Instructions / Assembly

11
ASSEMBLY INSTRUCTIONS
13
13-1. Attach the right side table (B) to the right side of the
standing boxes with 14 M6x12 bolts, keep the bolts
way into the hole. Do not tighten .
13-2. Attach the back side table (M) to the right side
table (B) with 4 M6x12 bolts and 4 M6 flange nuts, tighten.
13-3. Tighten the bolts in step 13-1.
14-1. Attach the left side table to the left side of the
standing boxes with 10 M6x12 bolts, keep the bolts
half way into the hole . Do not tighten .
14-2. Attach the back side table to the left side table (O)
with 4 M6x12 bolts and 4 flange nuts, tighten.
14-3. Tighten the bolts in step 14-1.
Hardware Used
15-1. Put the burner assembly (A) in to the main table and
keep the control knob toward the front door assembly (G).
15-2. Insert 4 M5x10 screws through holes, tighten.
15
14
Hardware Used
BB
x 4
M6 Flange nut
B
O
A
AA
x 18
Bolt M6X12
Hardware Used
CC
x 4
M5 X 10 Screw
BB
x 4
M6 Flange nut
AA
x 14
Bolt M6X12