Use and Care Manual
10
4..Place the Tank Holder/Base(I) Connecting all table legs ,Attach it with
4 screws(O) and 4 M6 washers(P),using the Screwdriver(Q).
A
B
C
D
5.Attach the assembled base to the bottom of top using 4pcs of screws (R)
and 4 M6 washers(P),using the Screwdriver(Q).make sure the panel (L)
faces the valve stem. Tighten the Bolts.
6.Hang the panel with door (H) on the circular mounts.










