User's Manual

Note
The default saving path is: Disk/iVMS-4200alarmPicture
5.
Click Sa
ve.
9.12.3 Set Alarm Sound
When the event is triggered, the client can give an audible warning to nofy the security
personnel. You can set the sound of the audible warning in this secon.
Steps
1.
Open the System Conguraon page.
2.
Click Alarm Sound tab to enter the Alarm Sound Sengs page.
3.
Oponal: Click
and select the audio les from the local path for dierent events.
4.
Oponal: Add cus
tomized alarm sound.
1) Click Add to add customized alarm sound.
2) Double click the Type eld to customize the alarm sound name as desired.
3) Click
and select the audio les from the local path for dierent alarms.
5.
Oponal: Click for a
tesng of the audio le.
6.
Oponal: Click
in the Operaon column to delete the custom sound.
7.
Click Sa
ve.
Note
The format of the audio le can only be WAV.
9.12.4 Set Access Control and Video Intercom Parameters
You can congure
the access control and video intercom parameters according to actual needs.
Steps
1.
Open the System Conguraon page.
2.
Click the Access Con
trol & Video Intercom tab.
3.
Input the required informaon.
Ringtone
Click
and select the audio le from the local path for the ringtone of indoor staon.
Oponally
, you can click
for a tesng of the audio le.
Max. Ring Duraon
Specify the seconds that the ring will last for at most. The maximum ring duraon
can be set
from 15s to 60s.
Max. Speaking Duraon with Indoor Staon
DS-K5671B Series Face Recognion Terminal User Manual
213