User's Manual

2.
Oponal: Check the event type and event status so that these events will show in the list if the
events are detected. The events of unchecked type or status will not be displayed in the list.
3.
Oponal: Check Show Latest Event and the latest access record will be selected and displayed at
the top of the record list.
4.
Oponal: Click the event to view the accessed person details, including person pictures
(captured picture and prole), person No., person name, organizaon, phone, contact address,
etc.
Note
You can double click the captured picture to enlarge it to view the details.
5.
Oponal: Righ
t click on the column name of the access event table to show or hide the column
according to actual needs.
9.10 Event Center
The event informaon (for example, device oine) received by the client displays. In the Event
Center, you can check the detailed informaon of the real-me and historical events, view the
event linked video, handle the events, and so on.
Before the client can receive the event informaon from the device, you need to enable the events
of the resource and arm the device rst. For details, refer to
Enable Receiving Event from Devices .
9.10.1 Enable Receiving Event from Devices
Before the client
soware can receive event nocaons from the device, you need to arm the
device rst.
Steps
1.
Click
→ Tool → De
vice Arming Control to open Device Arming Control page.
All the added devices appear on this page.
2.
Oponal: If ther
e are to many devices, enter the key words in Filter led to lter the device(s)
you want.
Note
For the ltered devices, you can click Arm All
or Disarm All to enable receiving event of these
devices.
3.
In the Aut
o-Arming column, turn on the switch to enable auto-arming.
DS-K5671B Series Face Recognion Terminal User Manual
182