User's Manual

Figure 9-14 Set Authencaon Modes for Card Readers
6.
Oponal: Select a
congured day and click Copy to Week to copy the same sengs to the whole
week.
7.
Oponal: Click Copy to to copy the sengs to other card readers.
8.
Click Save.
9.7.5 Congure First Person In
You can set mulple
rst persons for one access control point. Aer the rst person is authorized,
it allows mulple persons access the door or other authencaon acons.
Before You Start
Set the access group and apply the access group to the access control device. For details, refer to
Set Access Group to Assign Access Authorizaon to Persons
.
Perform this task when you want to congure opening door with rst person.
Steps
1.
Click Access Control → Advanced Funcon → Fir
st Person In to enter the First Person In page.
2.
Select an access control device in the list on the le panel.
3.
Select the current mode as Enable Remaining Open aer First Person or Disable Remaining
Open aer First Person from the drop-down list for each access control point of the selected
device.
Enable Remaining Open aer First Person
DS-K5671B Series Face Recognion Terminal User Manual
168