User's Manual

Alarm of Max. Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
Card Reader Type/Card Reader Descripon
Get card reader type and descripon. They are read-only.
Advanced
Enable Card Reader
Enable the funcon and e device can be used as an card reader.
OK LED Polarity/Error LED Polarity/Buzzer Polarity
Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the
card reader parameters. Generally, adopts the default sengs.
Max. Interval When Entering PWD
When you inpung the password on the card reader, if the interval between pressing two
digits is larger than the set value, the digits you pressed before will be cleared
automacally.
Tampering Detecon
Enable the an-tamper detecon for the card reader.
Communicate with Controller Every
When the access control device cannot connect with the card reader for longer than the
set me, the card reader will turn oine automacally.
Face 1:N Matching Threshold
Se
t the matching threshold when authencang via 1:N matching mode. The larger the
v
alue, the smaller the false accept rate and the larger the false rejecon rate when
authencaon.
Face Recognion Interval
The me interval between two connuous face recognions when authencang.
Face An-Spoong
Enable or disable the live face detecon
funcon. If enabling the funcon, the device can
recognize whether the person is a live one or not.
Face 1:1 Matching Threshold
Set the matching threshold when authencang via 1:1 matching mode. The larger the
v
alue, the smaller the false accept rate and the larger the false rejecon rate when
authencaon.
Applic
aon Mode
You can select indoor or others applicaon modes according to actual environment.
Lock Authencaon Failed Face
DS-K5671B Series Face Recognion Terminal User Manual
161