User's Manual

Example
You can control entrance & exit and manage aendance aer adding access control devices to the
client; you can perform video intercom with the indoor staons and door staons.
9.2.1 Add Device
The client provides three device adding modes including by IP/domain, IP segment, and ISUP
protocol. The client also supports imporng mulple devices in a batch when there are large
amount of devices to be added.
Add Online Device
The acve online devices in the same local subnet with the client soware will be displayed on the
Online Device area. You can click Refresh Every 60s to refresh the informaon of the online
devices.
Add Single or Mulple Online Devices
The client can detect online devices which are in the same network as the PC running the client.
Y
ou can select a detected online device displayed in the online device list and add it to the client.
For detected online devices sharing the same user name and password, you can add them to the
client in a batch.
Before You Start
●
The device(s) to be added are in the same network as the PC running the client.
●
The device(s) to be added have been acvated.
Steps
1.
Click De
vice Management → Device 。
2.
Click Online Device to show the online device area.
The searched online devices are displayed in the list.
Figure 9-2 Online Device
DS-K5671B Series Face Recognion Terminal User Manual
125