User's Manual

Door Staon No.
Set the device installed oor No.
Note
●
If y
ou change the No., you should reboot the device.
●
The main door staon No. is 0, and the sub door staon No. ranges from 1 to 16.
Community No.
Se
t the device community No.
Building No.
Set the device building No.
Unit No.
Set the device unit No.
Note
If you change the No., you should reboot the device.
If set the device type as Out
er Door Staon, you can set the period No., outer door staon No.,
and community No.
Outer Door Staon No.
If y
ou select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Community No.
Se
t the device community No.
Congure SIP Parameters
Set the device's IP address and the SIP server's IP address. Aer
seng the parameters, you can
communicate among the access control device, door staon, indoor staon, main staon, and the
plaorm.
Note
Only the access control device and other devices or systems (such as door staon, indoor staon,
main staon,
plaorm) are in the same IP segment, the two-way audio can be performed.
Go to Conguraon → In
tercom → Linked Network Sengs .
Set the main staon's IP address and SIP server's IP address.
DS-K5671B Series Face Recognion Terminal User Manual
113