User's Manual

Set Manual and Auto Aendance via Web
Set the aendance mode as Manual and Auto, and the system will automacally change the
aendance status according to the congured schedule. At the same me you can manually
chang
e the
aendance status aer the authencaon.
Before You Start
Add at least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1.
Click Conguraon → Aendance to enter the sengs page.
2.
Set the Aendance Mode as Manual and Auto.
3.
Enable the Aendance Status funcon.
4.
Enable a group of aendance status.
Note
The
Aendance Property will not be changed.
5.
Oponal: Select an s
tatus and change its name if required.
6.
Set the status' schedule. Refers to
Time Sengs for details.
R
esult
On the inial page and authencate. The authencaon will be marked as the congured
aendance status according to the schedule. If you tap the edit icon on the result tab, you can
select a s
tatus to take aendance manually, the authencaon will be marked as the edited
aendance status.
Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authencaon from Monday 11:00 to 12:00 will be marked as break.
8.6.18 General Sengs
Set
Authencaon Parameters
Click Conguraon → General → Authencaon Sengs .
Note
The
funcons vary according to dierent models. Refers to the actual device for details.
Click Sa
ve to save the sengs aer the conguraon.
Card Reader
Select Main Card Reader or Sub Card Reader from the drop-down list.
DS-K5671B Series Face
Recognion Terminal User Manual
107