User's Manual

Activation
Power on and wire the network cable aer installaon. You should
acvate the device before the first login.
If the device is not acvated yet, it will enter the Acvate Device page aer powering on.
Steps:
1. Create a password and confirm the password.
2. Tap Acvate to acvate the device.
Note: For other acvaon methods, see the device user manual.
1. Tap the sengs icon at the lower right corner of the inial
page and input the acvaon password to enter the main page.
2. Enter the User Management page, tap + to enter the Add User
page.
4. Tap Face and collect the face informaon according to the
instrucons.
You can view the captured picture at the upper right corner of
the page. Make sure the face picture is in good quality and size.
For details about the ps and posions when collecng or
comparing the face picture, see the contents on the right.
5. If the picture is in good condion, tap Save to save the picture.
Or tap Try Again to take another face picture.
6. Tap to save the sengs.
Go back to the inial page to start authencaon.
For other authencaon methods, see the device user manual.
Adding Face Information Positions When Collecting/
Comparing Face Picture
(Recommended Distance: 0.5m)
Tips When Collecting/
Comparing Face Picture
Expression
Posture
Size
1.4m
0.5m
1.4m
Too High
Too Low
Too Close
Too Far
1.4m
1.5m
1.4m
Make sure your face is in the middle of the collecng window.
Correct Tilt RaiseSide Bow
0.5m 0.5m
Recommended Height:
1.43m to 1.90m
Correct
Too Close Too Far
1.4m
Too
Close
Too
Far
Correct
1m
Height:
1.43m to 1.90m
Move
Back and Forth
Note: Only the devices with the fingerprint module support the fingerprint related
funcons.
Recommended:
Use 1:1 Face Matching when the face is hard to recognize.
Use other authencaon methods if the device if affected by the light or other
items.
1:N Matching: The device will compare the captured face picture with the ones
in the database.
1:1 Matching: The device will compare the captured face picture with the user
linked face picture.
Regulatory Information
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the RE Direcve
2014/53/EU, the EMC Direcve 2014/30/EU, the RoHS Direcve
2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collecon points. For more informaon
see: www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentaon for specific baery
informaon. The baery is marked with this symbol, which may
include leering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the baery to your supplier or to a
designated collecon point. For more informaon see: www.recycle-
this.info
FCC Conditions
This device complies with part 15 of the FCC Rules. Operaon is subject to the
following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operaon.
FCC Information
Please take aenon that changes or modificaon not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucons, may cause harmful
interference to radio communicaons. However, there is no guarantee that interference
will not occur in a parcular installaon. If this equipment does cause harmful
interference to radio or television recepon, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
Device Wiring (With Secure Door Control Unit)
Keep your expression naturally when collecng or comparing face pictures, just like the
expression in the picture on the right.
In order to get a good quality and accurate face picture, posion your face looking at
the camera when collecng or comparing face pictures.
Do not wear hat, sunglasses, or other accessories that can
affect the facial recognion funcon.
Do not make your hair cover your eyes, ears, etc. and
heavy makeup is not allowed.
STRONG PASSWORD RECOMMENDED–
We highly recommend you create a strong
password of your own choosing (using a minimum
of 8 characters, including upper case leers, lower
case leers, numbers, and special characters) in
order to increase the security of your product. And
we recommend you reset your password regularly,
especially in the high security system, reseng the
password monthly or weekly can beer protect
your product.
Secure Door
Control Unit
Wiring Terminal
Note: The secure door control unit should connect to an external power supply seperately.
Exit Buon
Power Input
SENSOR
BUTTON
B1
B2
B3
B4
Green/Brown
Black
Green/Black
Black
Lock Output
NC
C1
C2
C3
COM
NC
White/Purple
White/Black
White/Red
Red
Black
Door Magnec
Exit Buon
NO
Power
Electric
Dropbolt
Electric
Strike
Sensor Input
Face Recognition Terminal
5
2.2
3
NO
Biometric recognion products are not 100% applicable to an-spoofing
environments. If you require a higher security level, use mulple authenca-
on modes.
If you adopt mulple authencaon modes, you should authencate other
methods before authencang face.
Two-Way Audio
4
Call Device from Client Software
Aer adding the device on the client soware, you can enter the Live View page. Right click the live
view window and click Start Two-Way Audio to start two-way audio.
Call Client Software from Device
Aer adding the device on the client soware, tap -> , and tap Answer on the pop-up
window on the client soware to start two-way audio.
Note: If the device is added by mulple client sowares and when the device is calling the client
soware, only the first client soware added the device will pop up the call receiving window.
Call Indoor Station from Device
Aer adding the device and the indoor staon on the client soware, link the added user
and the added indoor staon, and set a room No. for the indoor staon.
Tap and enter the room No. And tap to call the indoor staon.
Call Center from Device
Aer adding the device and center on the client soware, tap -> to call the center. When the
center answers the call, you can start two-way audio.
Note: The device will call the center in priority when tap the administrator icon.
Aer adding the device to the client soware, you can call the device from the client soware, call the
client soware from the device, call the center from the device, or call the indoor staon form the
device.
Safety Instruction
These instrucons are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precauon measure is divided into Warnings and Cauons:
Warnings: Neglecng any of the warnings may cause serious injury or death.
Cauons: Neglecng any of the cauons may cause injury or equipment damage.
Warnings
All the electronic operaon should be strictly compliance with the electrical safety
regulaons, fire prevenon regulaons and other related regulaons in your local
region.
Please use the power adapter, which is provided by normal company. The power
consumpon cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause
over-heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug
the power cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest
service center. Never aempt to disassemble the device yourself. (We shall not assume
any responsibility for problems caused by unauthorized repair or maintenance.)
Cauons
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnesm radiaon. Avoid the equipment installaon on vibraons surface or
places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specificaon of the device for
the detailed operang temperature), cold, dusty or damp locaons, and do not expose
it to high electromagnec radiaon.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low venlaon or heat source such as
heater or radiator is forbidden (ignorance can cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfuncon however), and affecng the endurance of
sensor at the same me.
Please use the provided glove when open up the device cover, avoid direct contact
with the device cover, because the acidic sweat of the fingers may erode the surface
coang of the device cover.
Please use a so and dry cloth when clean inside and outside surfaces of the device
cover, do not use alkaline detergents.
Please keep all wrappers aer unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportaon without the original wrapper may result in damage on the device and
lead to addional costs.
Improper use or replacement of the baery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used baeries according to
the instrucons provided by the baery manufacturer.
Biometric recognion products are not 100% applicable to an-spoofing environ-
ments. If you require a higher security level, use mulple authencaon modes.
Working temperature: -30 °C to 60 °C
Indoor and outdoor use. If installing the device indoors, the device should be at least
2 meters away from the light, and at least 3 meters away from the window or the door.
If installing the device outdoors, you should apply Sililcone sealant among the cable
wiring area to keep the raindrop from entering.
Protecon level: IP65