User's Manual

DS-K1T6Q-F71M
Face Recognition Terminal
Quick Start Guide
Device Wiring (Without Secure Door Control Unit)
UDB
BTN
Notes:
When connecng door magnec sensor and exit buon, the device and the
RS-485 card reader should use the common ground connecon.
The Wiegand terminal here is a Wiegand input terminal. You should set
the face recognion terminal’s Wiegand direcon to “Input”. If you should connect
to an access controller, you should set the Wiegand direcon to “Output”. For details,
see Seng Wiegand Parameters in Communicaon Sengs in the user manual.
The suggested external power supply for door lock is 12 V, 1A.
The suggested external power supply for Wiegand card reader is 12 V, 1 A.
2
2.1
©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
It includes instrucons on how to use the Product. The soware embodied in the Product is
governed by the user license agreement covering that Product.
About this Manual
This Manual is subject to domesc and internaonal copyright protecon. Hangzhou
Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This
manual cannot be reproduced, changed, translated, or distributed, parally or wholly, by any
means, without the prior wrien permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are registered
trademarks or the subject of applicaons for the same by Hikvision and/or its affiliates.
Other trademarks menoned in this manual are the properes of their respecve owners.
No right of license is given to use such trademarks without express permission.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS
AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE
CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS
PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and processed. To protect
data, the development of Hikvision devices incorporates privacy by design principles. For
example, for device with facial recognion features, biometrics data is stored in your device
with encrypon method; for fingerprint device, only fingerprint template will be saved,
which is impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance
with the applicable data protecon laws and regulaons, including without limitaon,
conducng security controls to safeguard personal data, such as, implemenng reasonable
administrave and physical security controls, conduct periodic reviews and assessments of
the effecveness of your security controls.
Scan the QR code to get the user manual for detailed information.
Use only power supplies listed in the user instrucons:
Model Manufacturer Standard
C2000IC12.0-24P-DE
C2000IC12.0-24P-GB
MOSO Power Supply Technology Co., Ltd.
CEE
MOSO Power Supply Technology Co., Ltd.
BS
ADS-24S-12 1224GPG Shenzhen Honor Electronic Co., Ltd. CEE
Installaon Environment:
Indoor and outdoor installaon are supported. If installing the device
indoors, the device should be at least 2 meters away from the light, and
at least 3 meters away from the window or the door. If installing the
device outdoors, you should apply Sililcone sealant among the cable
wiring area to keep the raindrop from entering.
Make sure the environment illuminaon is more than 100 Lux.
Direct Sunlight
Direct Sunlight
through Window
Indirect Sunlight
through Window
Dimensions:
Backlight
Note: The figures are for reference only.
10Lux
＞1200Lux100~850Lux
1
2
Notes:
The installaon height here is the recommended height. You can change it according to your actual needs.
You can also install the device on the wall or other places without the gang box. For
details, refer to the User Manual.
For easy installaon, drill holes on mounng surface according to the supplied
mounng template.
Drill holes on the wall or other surface according to the mounng template and install the gang box.
Use two supplied screws (4_KA4×22-SUS) to secure the mounng plate on the gang box.
Use another four supplied screws to secure the mounng plate on the wall.
Route the cables through the cable hole of the mounng plate, and connect to the corresponding
external devices’ cables.
Note: Apply Silicone sealant among the cable wiring area to keep the raindrop from entering.
Before you start:
According to the baseline on the mounng template, sck the mounng template on the wall or
other surface, 1.4 meters higher than the ground.
Note: Make sure the output of external power supply fulfils LPS.
Steps:
3
4
5
Insert the fingerprint module to the holes at the boom of the main part.
Align the device with the mounng plate and hang the terminal on the
mounng plate.
Make sure the two sheets on each side of the mount plate have been in the
holes at the back of the device.
Use 1 supplied screws (SC-M4×12TP10-SUS) to secure the device and the
mounng plate.
3m
2m
1
Installation
Close to Light
1
2
4
3
Camera
233.2 mm
119.4 mm
30.8 mm
Wiring
Terminal
Power
InterfaceTAMPER
Debugging
Port
(For debugging
only)
PSAM Card
Card Slot
(Reserved)
Screen
Door Contact