User's Manual

Note
For details about adding device, see Add De
vice.
5.
En
ter the Live View page and double-click the added device to start live view.
Note
For details about operaons in the Liv
e View page, see Live View in the user manual of the client
soware.
6.
Righ
t click the live view image to open the right-click menu.
7.
Click Start Two-Way Audio to start two-way audio between the device and the client soware.
7.12.4 Call Room from Device
Steps
1.
Get the client soware from the supplied disk or the ocial website, and install the soware
according to the prompts.
2.
Run the client soware and the control panel of the soware pops up.
3.
Click Device Management to enter the Device Management interface.
4.
Add the indoor staon and the device to the client soware.
Note
For details about adding device, see Add De
vice.
5.
Link a user t
o an indoor staon and set a room No. for the indoor staon.
6.
Call the room.
-
If you have congured a specied room No. in the
Basic Sengs , you can tap to call the
r
oom.
-
If you have not congured a
specied room No. in the
Basic Sengs , you should tap on
the
authencaon page of the device. Enter the room No. on the dial page and tap
to call
the r
oom.
7.
Aer the indoor staon answers the call, you can start two-way audio with the indoor staon.
7.12.5 Call Mobile Client from Device
Steps
1.
Ge
t the mobile mobile client from the supplied disk or the ocial website, and install the
soware according to the prompts.
2.
Run the mobile client and add the device to the mobile client.
Note
For details, see the user manual of the mobile client.
3.
En
ter Basic Sengs → Shortcut Key and enable Call APP.
4.
Go back to the inial page and call the mobile client.
DS-K1T681 Series Face Recognion Terminal User Manual
75