User's Manual

Set the ISUP server's IP address.
Port No.
Set the ISUP server's port No.
Note
Port No. Range: 0 to 65535.
Device ID
Set de
vice serial no.
ISUP Key
If you choose V5.0, you should create an account and ISUP key. If you choose other version,
you should create an ISUP account only.
Note
●
Remember the ISUP acc
ount and ISUP key. You should enter the account name or the key
when the device should communicate with other plaorms via ISUP protocol.
●
ISUP key range: 8 to 32 characters.
7.2.6 Plaorm Access
You can change the device vericaon code and set the server address before you add the device
to the Hik
-ConnectGuarding Vision mobile client.
Before You Start
Make sure your device has connected to a network.
Steps
1.
Tap Comm. (Communicaon Sengs) on the Home page to enter the Communicaon Sengs
page.
2.
On the Communicaon Sengs page, tap Access to Hik
-Connect Access to Guarding Vision.
3.
Enable Access to Hik-Connect Access to Guarding Vision
4.
Enter Server IP.
5.
Create the Vericaon Code, and you need t
o enter the vericaon code when you manage the
devices via Hik-Connect Guarding Vision.
DS
-K1T681 Series Face Recognion Terminal User Manual
49