User's Manual

Note
Make sure the device has added to the Hik-Connect account.
Make sur
e the device has added to the Guarding Vision account.
a. Download Hik-Connect app.
Download Guar
ding Vision app.
b. Go to More → Reset Device Password .
c. Scan the QR code on the device and a vericaon code will be popped up.
Note
Tap the QR code to get a larger picture.
d. Enter the vericaon code on the device page.
6.
Create a new password and conrm it.
7.
Tap OK.
7.2 Communicaon Sengs
You can set the network parameters, the Wi-Fi parameter, the RS-485 parameters, the Wiegand
parameters on the communication settings page.
7.2.1 Set Wired Network Parameters
You can set the device wired network parameters, including the IP address, the subnet mask, the
gateway, and DNS parameters.
Steps
1.
Tap Comm. (Communicaon Sengs) on the Home page to enter the Communicaon
Sengs
page.
2.
On the Communicaon
Sengs page, tap Wired Network.
DS-K1T681 Series Face Recognion Terminal User Manual
42