User's Manual

Note
If you select MySql, y
ou should import the conguraon le (libmysql.dll) from local PC.
5.
Se
t the other required parameters of the third-party database, including server IP address,
database name, user name and password.
6.
Set table parameters of database according to the actual conguraon.
1) Enter the table name of the third-party database.
2) Set the mapped table elds between the client soware and the third-party database.
7.
Click Save to test whether database can be connected and save the sengs for the successful
connecon.
●
The aendance data will be wrien to the third-party database.
●
During synchronizaon, if the client disconnects with the third-party database, the client will
start reconnecon every 30 mins. Aer being reconnected, the client will synchronize the data
recorded during the disconnected me period to the third-party database.
Congure Break Time
You can add break me and set start me, end me, duraon, calculaon mode and other
parameters for the break. The added break me can also be edited or deleted.
Steps
1.
Click Time & Aendance → Timetable .
The added metables are displayed in the list.
2.
Select an added metable or click Add t
o enter seng metable page.
3.
Click Break Time to enter Break Time page.
4.
Click Break Time Sengs.
5.
Add break me.
1) Click Add.
2)
Enter a name for the break me.
3) Set related parameters for the break me.
Start Time / End Time
Se
t the me when the break starts and ends.
No Earlier Than / No Later Than
Set the earliest swiping me for starng break and the latest swiping me for ending
br
eak.
Break Duraon
The duraon from start me to end me of the break.
Calculaon
Auto Deduct
The xed break duraon will be excluded from work hours.
DS-K1T681 Series Face
Recognion Terminal User Manual
188