User's Manual

If the interval between card swiping of the same card is less than the set value, the card
swiping is invalid. You can set it as 0 to 255.
Alarm of Max. Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
Card Reader Type/Card Reader Descripon
Get card reader type and descripon. They are read-only.
Advanced
Enable Card Reader
Enable the funcon and e device can be used as an card reader.
OK LED Polarity/Error LED Polarity/Buzzer Polarity
Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the
card reader parameters. Generally, adopts the default sengs.
Max. Interval When Entering PWD
When you inpung the password on the card reader, if the interval between pressing two
digits is larger than the set value, the digits you pressed before will be cleared
automacally.
Tampering Detecon
Enable the an-tamper detecon for the card reader.
Ma
x. Times of Card Failure
Set the max. failure aempts of reading card.
Face 1:N Mathcing Threshold
Set the matching security level when authencang via 1:N matching mode. The larger the
v
alue, the smaller the false accept rate and the larger the false rejecon rate when
authencaon.
Face
Recognion Interval
The me interval between two connuous face recognions when authencang. By
default, it is 2s.
Face An-spoong
Enable or disable the face an-spoong funcon. If enabling the funcon, the device can
r
ecognize whether the person is a live one or not.
Face 1:1 Matching Threshold
Set the matching threshold when authencang via 1:1 matching mode. The larger the
value, the smaller the false accept rate and the larger the false rejecon rate when
authencaon.
Applic
aon Mode
You can select indoor or others applicaon modes according to actual environment.
DS-K1T681 Series Face Recognion Terminal User Manual
156