User's Manual

Note
You can click or to switch the resource display mode to thumbnail view or to list view.
8.
Click Import t
o import the selected resources to the group.
9.3.3 Edit Resource Parameters
Aer imporng the resources to the group, you can edit the resource parameters. For encoding
channel, you can edit the channel name, stream type, protocol type, etc. For access point, you can
edit the access point name. For alarm input, you can edit the alarm input name. Here we take
encoding channelaccess point as an example.
Before You Start
Import the resources to group.
Steps
1.
Enter the Device Management module.
2.
Click Device Management → Group to enter the group management page.
All the added groups are displayed on the le.
3.
Select a group on the group list and click Encoding Channel Access Point.
The encoding channelsaccess points imported to the group will display.
4.
Click
in the Operaon column to open the Edit Resource window.
5.
E
dit the camera informaon, including the camera name, the stream type, etc.
Video Str
eam
Select the stream type for live view of the camera as desired.
Note
You should start live view again to take eect.
Playback Stream Type
Select the s
tream type for playback of the camera as desired.
Note
●
This eld will display if the device supports dual-stream.
●
Y
ou should start live view again to take eect.
Rotaon Type
Select the r
otate type for the live view or playback of the camera as desired.
Protocol Type
Select the transmission protocol for the camera.
DS-K1T681 Series Face Recognion Terminal User Manual
130