User's Manual

Example
For example, on the 1st oor, there mounted 64 cameras, 16 doors, 64 alarm inputs, and 16 alarm
outputs. You can organize these resources into one group (named 1st Floor) for convenient
management. You can get the live view, play back the video les, control door status, and do some
other operaons of the devices aer managing the resources by groups.
9.3.1 Add Group
You can add group to organize the added device for convenient management.
Steps
1.
Enter the Device Management module.
2.
Click Device Management → Group to enter the group management page.
3.
Create a group.
-
Click Add Group and enter a group name as you want.
-
Click Create Group by Device Name and select an added device to create a new group by the
name of the selected device.
Note
The resources (such as encoding channels, alarm inputs/outputs, access points, etc.) of this
de
vice will be imported to the group by default.
9.3.2 Import Resources to Group
You can import the device resources (such as encoding channels, alarm inputs/outputs, access
poin
ts, etc.) to the added group in a batch.
Before You Start
Add a group for managing devices. Refer to
Add Group .
St
eps
1.
Enter the Device Management module.
2.
Click Device Management → Group to enter the group management page.
3.
Select a group from the group list and select the resource type as Encoding Channel, Alarm
Input, Alarm Output, Zone, Access Point, etc.
4.
Select a group from the group list and select the resource type as Encoding Channel, Alarm
Input, Alarm Output, Zone, etc.
5.
Select a group from the group list and select the resource type as Access Point, Alarm Input,
Alarm Output, etc.
6.
Click Import.
7.
Select the thumbnails/names of the resources in the thumbnail/list view.
DS-K1T681 Series Face Recognion Terminal User Manual
129