User's Manual

Table Of Contents
Port
Enter the device port No. The default value is 8000.
User Name
By default, the user name is admin.
Password
Enter the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
y
ou change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you change your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
6.
Oponal: Add the oine devices.
1)
Check Add Oine Device.
2) Enter the required informaon, including the device channel number and alarm input
number.
Note
Aer adding the oine device to the client, the device network status will be displayed as
"Oine"; When the device comes online, the device network status will turn to "Online", and
the clien
t will connect it automacally.
7.
Oponal: Check T
ransmission Encrypon (TLS) to enable transmission encrypon using TLS
(Transport Layer Security) protocol for security purpose .
Note
This funcon should be supported by the device.
If you have enabled Cercate Vericaon, you should click Open Cercate Folder to open
the default folder, and copy the cercate le exported from the device to this default
directory to strengthen the security. See for details about enabling cercate vericaon.
You can log into the device to get the cercate le by web browser.
8.
Check Synchronize Time to synchronize the device me with the PC running the client aer
adding the device to the client.
9.
Oponal: Check Import to Group to create a group by the device name, and import all the
channels of the device to the group.
10.
Finish adding the device.
-
Click Add to add the device and back to the device list page.
-
Click Add and New to save the
sengs and connue to add other device.
DS-K1T681 Series Face Recognion Terminal User Manual
123