User's Manual

7.
Check Synchronize Time to synchronize the device me with the PC running the client aer
adding the device to the client.
8.
Oponal: Check Import to Group to create a group by the device name, and import all the
channels of the device to this group.
Example
For encoding device, its encoding channels and alarm inputs/outputs will be imported to this
group.
For access control device, its access points, alarm inputs/outputs, and encoding channels (if
exist) will be imported to this group.
9.
Finish adding the device.
-
Click Add to add the device and back to the device list page.
-
Click Add and New to save the sengs and connue to add other device.
10.
Oponal: Perform the following operaon(s).
Remote
Conguraon
Click on Operaon column to set remote conguraon of the
c
orresponding device.
Note
For detail operaon steps for the remote conguraon, see the user
manual of the de
vice.
Device Status Click on
Operaon column to view device status, including
cameras, recording status, signal status, hardware status, etc.
Edit Device
Informaon
Click
on Operaon column to edit the device informaon,
such as IP address, user name, and password.
Check Online User Click on Operaon column to check the online users who
access the de
vice, such as user name, user type, user's IP address,
and login me.
Refresh Click
on Operaon column to get the latest device
informaon.
Delete Device Select one or mulple devices and click Dele
te to delete the
selected device(s) from the client.
Add Devices by IP Segment
If the devices share the same port No., user name and password, and their IP addresses ranges in
the same IP segment, you can add them to the client by specifying the start IP address and the end
IP address, port No., user name, password, etc of the devices.
Steps
1.
Enter the Device Management module.
DS-K1T681 Series Face Recognion Terminal User Manual
121