User's Manual

Add Device by IP Address or Domain Name
If you know the IP address or domain name of the device to add, you can add devices to the client
by specifying the IP address (or domain name), user name, password, etc.
Steps
1.
Enter Device Management module.
2.
Click Device tab on the top of the right panel.
The added devices are displayed on the right panel.
Figure 9-4 Add Device by IP Address or Domain Name
3.
Click Add t
o open the Add window, and then select IP/Domain as the adding mode.
DS-K1T681 Series Face
Recognion Terminal User Manual
119