User's Manual

Cauon
The password strength of the device can be automacally checked. We highly recommend
y
ou change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you change your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
7.
Oponal: Check S
ynchronize Time to synchronize the device me with the PC running the client
aer adding the device to the client.
8.
Oponal: Check Import to Group to create a group by the device name, and import all the
channels of the device to this group.
Example
For encoding device, its encoding channels and alarm inputs/outputs will be imported to this
group.
For access control device, its access points, alarm inputs/outputs, and encoding channels (if
exist) will be imported to this group.
9.
Click Add to add the devices.
10.
Oponal: P
erform the following operaon(s).
Remote
Conguraon
Click
on Operaon column to set remote conguraon of the
c
orresponding device.
Note
See the user manual of the device for details.
Device Status Click on
Operaon column to view device status, including
cameras, recording status, signal status, hardware status, etc.
Edit Device
Informaon
Click
on Operaon column to edit the device informaon,
such as IP address, user name, and password.
Check Online User Click on Operaon column to check the online users who
access the de
vice, such as user name, user type, user's IP address,
and login me.
Refresh Click
on Operaon column to get the latest device
informaon.
Delete Device Select one or mulple devices and click Dele
te to delete the
selected device(s) from the client.
DS-K1T681 Series Face Recognion Terminal User Manual
118