User's Manual

Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Floor No.
Set the device installed oor No.
Door Staon No.
Set the device installed oor No.
Note
If you change the No., you should reboot the device.
Community No.
Se
t the device installed community No.
If set the device type as Outer Door Staon, you can set the period No., outer door staon No.,
and community No.
Period No.
Set the device installed period No.
Outer Door Staon No.
If y
ou select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Community No.
Se
t the device installed community No.
Congure SIP Parameters
Set the device's IP address and the SIP server's IP address. Aer
seng the parameters, you can
communicate among the access control device, door staon, indoor staon, main staon, and the
plaorm.
Note
Only the access control device and other devices or systems (such as door staon, indoor staon,
main staon,
plaorm) are in the same IP segment, the two-way audio can be performed.
Go to Conguraon → Access Con
trol → Linked Network Sengs .
Set the main staon's IP address and SIP server's IP address.
DS-K1T681 Series Face
Recognion Terminal User Manual
102