User's Manual

Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authencaon from Monday 11:00 to 12:00 will be marked as break.
8.6.19 General Sengs
Set Authencaon Parameters
Click Conguraon → Access Con
trol → Authencaon Sengs .
Note
The
funcons vary according to dierent models. Refers to the actual device for details.
Click Sa
ve to save the sengs aer the conguraon.
Device Type
Select Main Card Reader or Sub Card Reader from the drop-down list.
Main Card Reader
You can congure
the device card reader's parameters.
Sub Card Reader
You can congure the connected peripheral card reader's parameters.
If select Main Card Reader:
Card Reader Type/Card Reader Descripon
Get card reader type and descripon. They are read-only.
Enable Car
d Reader
Enable the card reader's funcon.
Authenc
aon
Select an authencaon mode according to your actual needs from the drop-down list.
Display Authencaon Result
Check F
ace Picture, Name, or Employee ID. When authencaon is completed, the system will
display the selected contents in the result.
Recognion Interval
Y
ou can set the interval between 2 connuous recognion of a same person during the
authencaon. In the congured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Authencaon Interval
You can set the authencaon interval of the same person when authencang. The same
person can only authencate once in the congured interval. A second authencaon will be
failed.
DS-K1T681 Series Face
Recognion Terminal User Manual
97