User's Manual

Start/end recording video.
Capture the image.
3.
Click Default to restore the parameters to the default sengs.
8.6.17 Set Supplement Light Brightness
Set the device supplement light brightness.
Steps
1.
Click Conguraon → Image → Supplement Light Parameters .
Figure 8-10 Supplement Light Sengs Page
2.
Select a supplemen
t light type and mode from the drop-down list. If you select the mode as ON,
you should set the brightness.
8.6.18 Time and Aendance Sengs
If you want to track and monitor when the persons start/stop work and monitor their working
hour
s and late arrivals, early departures, me taken on breaks, and absenteeism, you can add the
person to the shi group and assign a shi schedule (a rule for the aendance dening how the
schedule repeats, the shi type, break sengs, and the card swiping rule.) to the shi group to
dene the
aendance parameters for the persons in the shi group.
Disable Aendance Mode via Web
Disable the aendance mode and the system will not display the aendance status on the inial
page.
Steps
1.
Click Conguraon →
Aendance to enter the sengs page.
2.
Set the Aendance Mode as Disable.
DS-K1T681 Series Face Recognion Terminal User Manual
94