User's Manual

Set the door unlocking duraon. If the door is not opened for the set me, the door will be
locked.
Open Timeout Alarm (Door Open Timeout Alarm)
An alarm will be triggered if the door has not been closed within the congured me duraon.
8.5.16 Set Card Security
Click Conguraon → Access Control → Card Security to enter the sengs page.
Set the parameters and click Save.
Enable NFC Card
In order to prevent the mobile phone from geng the data of the access control, you can
enable NFC card to increase the security level of the data.
Enable M1 Card
Enable M1 card to authencate by presenng M1 card.
Enable EM Card
Enable EM card to authencate by presenng EM card.
Enable CPU Card
The device can read the data from CPU card when enabling the CPU card funcon.
Enable ID Card
Enable ID c
ard to authencate by presenng ID card.
8.5.17 Congure SIP Parameters
Set the master staon's IP address and the SIP server's IP address. Aer seng the parameters,
y
ou can communicate among the access control device, door staon, indoor staon, master
staon, and the plaorm.
Note
Only the access control device and other devices or systems (such as door staon, indoor staon,
master staon, plaorm) are in the same IP segment, the two-way audio can be performed.
Click Maintenance and Management → Group to enter the device list.
Click to enter the remote conguraon page.
Click Access Con
trol → Linked Network Sengs and set the master staon's IP address and SIP
server's IP address.
Click Save.
DS-K1T680 Series Face
Recognion Terminal User Manual
76