User's Manual

Set Device No.
Click Conguraon → Video Intercom → Device No. .
Figure 8-11 Device No. Sengs
Click Sa
ve to save the sengs aer the conguraon.
Device Type
The de
vice can be used as a door staon or outer door staon. Select a device type from the
drop-down list.
Note
If you change the device type, you should reboot the device.
Community No.
Se
t the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Floor No.
Set the device installed oor No.
No.
If y
ou select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Set Linked Network Sengs
Click Conguraon → Video In
tercom → Linked Network Sengs .
You can set the device type, the SIP server's IP address, and the master staon's IP address.
Aer seng the parameters, you can communicate among the access control device, door staon,
indoor staon, master staon, and the plaorm.
DS-K1T680 Series Face Recognion Terminal User Manual
74