User's Manual

HTTP
It refers to the port through which the browser accesses the device. For example, when the
HTTP Port is modied to 81, you need to enter hp://192.0.0.65:81 in the browser for login.
R
TSP
It refers to the port of
real-me streaming protocol.
HTTPS
Set the HTTPS for accessing the browser. Cercate is required when accessing.
Server
It refers to the port through which the client adds the device.
WebSocket
TCP-based full-duplex communicaon protocol port for plug-in free preview.
Set Wi-Fi Parameters
Set the Wi-Fi parameters for device wireless connecon.
Steps
Note
The
funcon should be supported by the device.
1. Click Conguraon → Ne
twork → Basic Sengs → Wi-Fi .
Figure 8-7 Wi-Fi Sengs Page
2. Check Wi-Fi.
3. Select a Wi-Fi
-
Click of a Wi-Fi in the list and enter the Wi-Fi password.
-
Click Add and en
ter a Wi-Fi's name, password, and encrypon type. Click Connect. When the
Wi-Fi is connected, click OK.
4. Oponal: Se
t the WLAN parameters.
1) Click TCP/IP Sengs.
DS-K1T680 Series Face Recognion Terminal User Manual
67