User's Manual

8.5.9 Network Sengs
Set TCP/IP, port, Wi-Fi parameters, report strategy and plaorm access.
Note
Some device models do not support Wi-Fi sengs. Refer to the actual products when
conguraon.
Set Basic Network Parameters
Set TCP/IP Parameters
Click Conguraon → Ne
twork → Basic Sengs → TCP/IP .
Figure 8-6 TCP/IP Sengs Page
Click Sa
ve to save the sengs.
NIC Type
Select a NIC type from the drop-down list. By default, it is Auto.
DHCP
If uncheck the
funcon, you should set the IPv4 address, IPv4 subnet mask, IPv4 default
gateway, MTU, and the device port.
If you check the funcon, the system will allocate the IPv4 address, IPv4 subnet mask, and the
IPv4 default gateway automacally.
DNS Server
Se
t the preferred DNS server and the Alternate DNS server according to your actual need.
Set Port Parameters
Set the HTTP, RTSP, HTTPS, Server and WebSocket port parmaeters.
Click Conguraon → Ne
twork → Basic Sengs → Port .
DS-K1T680 Series Face
Recognion Terminal User Manual
66