User's Manual

7.9.4 Set Manual and Auto Aendance via Device

Set the aendance mode as Manual and Auto, and the system will automacally change the

aendance status according to the congured schedule. At the same me you can manually

chang

e the

aendance status aer the authencaon.

Before You Start

Add at least one user, and set the user's authencaon mode. For details, see User Management.

Steps

1. Tap T&A Status to enter the T&A Status page.

2. Set the Aendance Mode as Manual and Auto.

Figure 7-15 Manual and Auto Mode

3. Enable the Aendance Status funcon.

4. Enable a gr

oup of aendance status.

Note

The

Aendance Property will not be changed.

5. Oponal: Select an s

tatus and change its name if required.

The name will be displayed on the T & A Status page and the authencaon result page.

6. Set the status' schedule.

1) Tap Aendance Schedule.

Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.

3) Set the selected aendance status's start me of the day.

4) Tap OK.

5) Repeat step 1 to 4 according to your actual needs.

DS-K1T680 Series Face

Recognion Terminal User Manual