User's Manual

Figure 7-14 Auto Aendance Mode
3. Enable the Aendance Status funcon.
4. Enable a gr
oup of aendance status.
Note
The
Aendance Property will not be changed.
5. Oponal: Select an s
tatus and change its name if required.
The name will be displayed on the T & A Status page and the authencaon result page.
6. Set the status' schedule.
1) Tap Aendance Schedule.
2)
Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.
3) Set the selected aendance status's start me of the day.
4) Tap Conrm.
5)
Repeat step 1 to 4 according to your actual needs.
Note
The
aendance status will be valid within the congured schedule.
Result
When y
ou authencate on the inial page, the authencaon will be marked as the congured
aendance status according to the congured schedule.
Ex
ample
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authencaon from Monday 11:00 to 12:00 will be marked as break.
DS-K1T680 Series Face Recognion Terminal User Manual
53