User's Manual

Parameter Descripon
When enabling the ECO mode, you can set the ECO mode’s threshold.
The larger the value, the easier the device entering the ECO mode.
ECO Mode (1:1)
Set the matching threshold when authencang via ECO mode 1:1
matching mode. The larger the value, the smaller the false accept rate
and the larger the false rejecon rate.
ECO Mode (1:N)
Set the matching threshold when authencang via ECO mode 1:N
matching mode. The larger the value, the smaller the false accept rate
and the larger the false rejecon rate
Hard Hat Detecon
Level
Aer enabling the hard hat detecon, you can set the strategy.
Prompt and Open
If the person do not wear the hard hat when authencang, the
device prompts and the door is open.
Prompt and Not Open Door
If the person do not wear the hard hat when authencang, the
device prompts and the door keeps closed.
7.8 Set Access Control Parameters
You can set the access control permissions, including the funcons of authencaon mode, enable
NFC card, door contact, and door open me.
On the Home page, tap A
CS (Access Control Sengs) to enter the Access Control Sengs page.
Edit the access control parameters on this page.
Figure 7-11 Access Control Parameters
DS-K1T680 Series Face Recognion Terminal User Manual
49