User's Manual

Note

• If you want to transfer all user informaon from one device (Device A) to another (Device B),

ou should export the informaon from Device A to the USB ash drive and then import from

the USB ash drive to Device B. In this case, you should import the user data before imporng

the prole photo.

• The supported USB ash drive format is FAT32.

• The imported pictures should be saved in the folder (named enroll_pic) of the root directory

and the picture's name should be follow the rule below:

Card No._Name_Department_Employee ID_Gender.jpg

• If the folder enroll_pic cannot save all imported pictures, you can create another folders,

named enroll_pic1, enroll_pic2, enroll_pic3, enroll_pic4, under the root directory.

• The employee ID should be less than 32 characters. It can be a combinaon of lower leers,

upper leers, and numbers. It should not be duplicated, and should not start with 0.

• Requirements of face picture should follow the rules below: It should be taken in full-face

view, directly facing the camera. Do not wear a hat or head covering when taking the face

picture. The format should be JPEG or JPG. The resoluon should be 640 × 480 pixel or more

than of 640 × 480 pixel. The picture size should be between 60 KB and 200 KB.

7.4.3 Export Data

Steps

1. Plug a USB

ash drive in the device.

2. On the Home page, tap Data → Export Data .

3. Tap Event Data, User Data, or Face Data.

4. Oponal: Create a password for exporng. When you import those data to another device, you

should enter the password.

Note

• The supported USB ash drive format is DB.

•

The system supports the USB ash drive with the storage of 1G to 32G. Make sure the free

space of the USB ash drive is more than 512M.

• The exported user data is a DB le, which cannot be edited.

7.5 Identy

Authencaon

Aer network conguraon, system parameters conguraon and user conguraon, you can go

back to the inial page for identy authencaon. The system will authencate person according

to the congured authencaon mode.

You can authencate

identy via 1:1 matching or 1:N matching.

DS-K1T680 Series Face

Recognion Terminal User Manual