User's Manual

Steps
1. Tap Comm. (Communicaon Sengs) on the Home page to enter the Communicaon
Sengs
page.
2. On the Communicaon Sengs page, tap Wiegand to enter the Wiegand tab.
Figure 7-7 Wiegand Sengs
3. Enable the Wieg
and funcon.
4. Select a transmission direcon.
• Output: A face recognion terminal can connect an external access controller. And the two
devices will transmit the card No. via Wiegand 34.
• Input: A face recognion terminal can connect a Wiegand card reader.
5. Tap
to save the network parameters.
Note
If you change the external device, and aer you save the device parameters, the device will
r
eboot automacally.
7.2.5 Enable 3G/4G
You can enable the 3G/4G funcon to connect the 3G/4G network .
T
ap Comm. (Communicaon Sengs) on the Home page to enter the Communicaon Sengs
page, and enable 3G/4G.
7.3 User Management
On the user management interface, you can add, edit, delete and search the user.
7.3.1 Add Administrator
The administrator can log in the device backend and congure the device parameters.
DS-K1T680 Series Face Recognion Terminal User Manual
35