User's Manual

Steps
1. Tap Comm. (Communicaon Sengs) on the Home page to enter the Communicaon
Sengs
page.
2. On the Communicaon Sengs page, tap Wired Network.
Figure 7-4 Wired Network Sengs
3. Se
t DHCP, IP Address, Subnet Mask, or Gateway.
Note
The device's IP address and the computer IP address should be in the same IP segment.
7.2.2 Set Wi-Fi Parameters
You can enable the Wi-Fi funcon and set the Wi-Fi related parameters.
St
eps
Note
The
funcon should be supported by the device.
1. T
ap Comm. (Communicaon Sengs) on the Home page to enter the Communicaon Sengs
page.
2. On the Communicaon Sengs page, tap.
DS-K1T680 Series Face
Recognion Terminal User Manual
32