User's Manual
Steps
1. When you enter the Select Network page, tap Wired Network or Wi-Fi for your actual needs.
Figure 6-3 Select Network
Note
Disconnect the wired network before connecng a Wi-Fi.
2. T
ap Next.
Wired Network
Note
Make sure the device has connected to a network.
If enable DHCP, the s
ystem will assign the IP address and other parameters automacally.
If disable DHCP, y
ou should set the IP address, the subnet mask, and the gateway.
Wi-Fi
Select a Wi-Fi and enter the Wi-Fi's password to get connected.
DS-K1T680 Series Face
Recognion Terminal User Manual
25