User's Manual

• Aer acvaon, if you need to operate the device remotely via APP, you should scan the QR

ode to link to the APP. For details, see Link to Mobile Client .

• Aer acvaon, if you need to add administrator to manage the device parameters, you should

set administrator. For details, see Add Administrator .

5.2 Acvate via Web Browser

You can acvate the device via the web browser.

Steps

1. Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and

press Enter.

Note

Make sure the device IP address and the computer's should be in the same IP segment.

2. Cr

eate a new password (admin password) and conrm the password.

Cauon

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

our own choosing (using a minimum of 8 characters, including upper case leers, lower case

leers, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

reseng the password monthly or weekly can beer protect your product.

3. Click Acvate

4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the

client soware.

5.3 Acvate via SADP

SADP is a tool to detect, acvate

and modify the IP address of the device over the LAN.

Before You Start

• Get the SADP soware

from the supplied disk or the ocial website

hp://

www.hikvision.com/en/ , and install the SADP according to the prompts.

•

The device and the PC that runs the SADP tool should be within the same subnet.

The following steps show how to acvate a device and modify its IP address. For batch acvaon

and IP addresses modicaon, refer to User Manual of SADP for details.

Steps

1. Run the SADP soware and search the online devices.

2. Find and select y

our device in online device list.

3. Input new password (admin password) and conrm the password.

DS-K1T680 Series Face Recognion Terminal User Manual