User's Manual

Delete Select one or mulple major leave types and click Dele
te on the right to delete the
selected minor leave type(s).
Synchronize Authencaon Record to Third-Party Database
The aendance data recorded in client soware can be used by other system for calculaon or
some other operaons. You can enable synchronizaon funcon to apply the authencaon record
from client soware to the third-party database automacally.
Steps
1. Enter Time & Aendance module.
2. Click Aendance Sengs → Third-Party Database .
3. Set Apply to Database switch to on to enable synchronizaon funcon.
4. Select database Type as SQLServer or MySql.
Note
If you select MySql, y
ou should import the conguraon le (libmysql.dll) from local PC.
5. Se
t the other required parameters of the third-party database, including server IP address,
database name, user name and password.
6. Set table parameters of database according to the actual conguraon.
1) Enter the table name of the third-party database.
2)
Set the mapped table elds between the client soware and the third-party database.
7. Click Save to test whether database can be connected and save the sengs for the successful
connecon.
• The
aendance data will be wrien to the third-party database.
• During synchronizaon, if the client disconnects with the third-party database, the client will
start reconnecon every 30 mins. Aer being reconnected, the client will synchronize the
data recorded during the disconnected me period to the third-party database.
Congure Break Time
You can add break me and set start me, end
me, duraon, calculaon mode and other
parameters for the break. The added break me can also be edited or deleted.
Steps
1. Click Time & Aendance → Time
table .
The added metables are displayed in the list.
2. Select an added metable or click Add to enter seng metable page.
3. Click Break Time to enter Break Time page.
4. Click Break Time Sengs.
5. Add br
eak me.
1) Click Add.
DS-K1T680 Series Face Recognion Terminal User Manual
146