User's Manual

2. Click Aendance
Sengs → Aendance Check Point to enter the Aendance Check Point
Sengs page.
3. Oponal: Set Set All Card Readers as Check Points switch to o.
Only the card readers in the list will be set as the aendance check points.
4. Check the desired card reader(s) in the device list as aendance check point(s).
5. Set check point funcon as Start/End-Work, Start-Work or End-Work.
6. Click Set as Check Point.
The congured aendance check point displays on the right list.
Congure Holiday
You can add the holiday during which the check-in or check-out will not be recorded.
Add Regular Holiday
You can congure a holiday which will take eect annually on regular days during the eecve
period, such as New Year's Day, Independence Day, Christmas Day, etc.
Steps
1. Enter the Time & Aendance module.
2. Click Aendance Sengs → Holida
y to enter the Holiday Sengs page.
3. Check Regular Holiday as holiday type.
4. Custom a name for the holiday.
5. Set the rst day of the holiday.
6. En
ter the number of the holiday days.
7. Set the aendance status if the employee works on holiday.
8. Oponal: Check Repeat Annually to make this holiday seng eecve every year.
9. Click OK.
The added holiday will display in the holiday list and calendar.
If the date is selected as dierent holidays, it will be recorded as the rst-added holiday.
10. Oponal:
Aer adding the holiday, perform one of the following operaons.
Edit Holiday Click
to edit the holiday informaon.
Delete Holiday Select one or more added holidays, and click Delete to delete the
holiday(s) from the holiday list.
Add Irregular Holiday
You can congure
a holiday which will take eect annually on irregular days during the eecve
period, such as Bank Holiday.
DS-K1T680 Series Face
Recognion Terminal User Manual
144