User's Manual

Name
Edit the card reader name as desired.
Minimum Card Swiping Interval
If the interval between card swiping of the same card is less than the set value, the card
swiping is invalid. You can set it as 0 to 255.
Alarm of Max. Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
Card Reader Type/Card Reader Descripon
Get card reader type and descripon. They are read-only.
Advanced
Enable Card Reader
Enable the funcon and e device can be used as an card reader.
OK LED Polarity/Error LED Polarity/Buzzer Polarity
Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the
card reader parameters. Generally, adopts the default sengs.
Max. Interval When Entering PWD
When you inpung the password on the card reader, if the interval between pressing two
digits is lar
ger than the set value, the digits you pressed before will be cleared
automacally.
Tampering Detecon
Enable the an-tamper
detecon for the card reader.
Max. Times of Card Failure
Set the max. failure aempts of reading card.
Face 1:N Mathcing Threshold
Set the matching security level when authencang via 1:N matching mode. The larger
the v
alue, the smaller the false accept rate and the larger the false rejecon rate when
authencaon.
Face
Recognion Interval
The me interval between two connuous face recognions when authencang. By
default, it is 2s.
Face An-spoong
Enable or disable the face an-spoong funcon. If enabling the funcon, the device can
r
ecognize whether the person is a live one or not.
Face 1:1 Matching Threshold
DS-K1T680 Series Face Recognion Terminal User Manual
116