User's Manual

Note
For details, refer to Se
t Access Group to Assign Access Authorizaon to Persons .
Figure 9-3 Congure Access Control Informaon
4. Se
t a unique PIN code for the person which can be used for access authencaon.
-
Manually enter a PIN code containing 4 to 8 digits.
Note
Persons' PIN codes cannot be repeated.
-
Click Generate to randomly generate an unrepeated PIN code of 6 digits.
Note
If there are repeated PIN codes, a prompt will pop up on the client. The admin can generate
a ne
w PIN code to replace the repeated PIN code and nofy related persons.
5. Check the per
son's operaon permissions.
Super User
If the person is set as a super user, he/she will have authorizaon to access all the doors/
oors and will be exempted from remaining closed restricons, all an-passback rules, and
rst person
authorizaon.
Extended Door Open Time
Use this
funcon for persons with reduced mobility. When accessing the door, the person
will have more me than others to pass through doors.
For details about seng the door's open duraon, refer to Congure Parameters for Door/
Elevator .
Add to Blocklist
Add the person to the blocklist and when the person tries to access doors/oors, an event
will be triggered and sent to the client to nofy the security personnel.
Mark as Visit
or
If the person is a visitor, you should set the her/his valid mes for visit.
DS-K1T680 Series Face
Recognion Terminal User Manual
100