User's Manual

Table Of Contents
3.
Select EHome as the adding mode.
4.
Enter the required informaon.
Device Account
Enter the account name registered on EHome protocol.
EHome Key
For EHome 5.0 devices, enter the EHome key if you have set it when conguring network
center parameter for the device.
Note
This funcon should be supported by the device.
5.
Oponal: Check S
ynchronize Time to synchronize the device me with the PC running the client
aer adding the device to the client.
6.
Oponal: Check Import to Group to create a group by the device name, and import all the
channels of the device to the group.
7.
Finish adding the device.
-
Click Add to add the device and go back to the device list.
-
Click Add and New to save the sengs and connue to add other device.
Note
Face pictures cannot be applied to devices added by EHome account.
8.
Oponal: P
erform the following operaon(s).
Device Status Click
on Operaon column to view device status.
Edit Device
Informaon
Click on Operaon column to edit the device informaon, such as
de
vice name, device account, and EHome key.
Check Online User Click
on Operaon column to check the online users who access the
de
vice, such as user name, user type, user's IP address, and login me.
Refresh Click
on Operaon column to get the latest device informaon.
Delete Device Select one or mulple devices and click Delete to delete the selected
device(s) from the client.
Import Devices in a Batch
The devices can be added to the soware in a batch by entering the device informaon in the pre-
dened CSV le.
Steps
1.
En
ter the Device Management page
2.
Click Add to open the adding device window.
3.
Select Batch Import as the adding mode.
4.
Click Export Template and then save the pre-dened template (CSV le) on your PC.
DS-K6300 Series Payment Terminal User Manual
82