User's Manual

When there are both very bright and very dark areas simultaneously in the view, WDR
balances the brightness level of the whole image and provide clear images with details.
Supplement Light Parameters
Set the supplement light type from the drop down list and select to enable or disable it.
If you select On, you can set the light brightness.
If you select Schedule, you can set the light brightness and its schedule.
Start/end recording video.
Capture the image.
3.
Click Default to restore the parameters to the default sengs.
9.5.15 General Sengs
Set Authencaon Parameters
Click Conguraon → General → Authencaon Sengs .
Note
The
funcons vary according to dierent models. Refers to the actual device for details.
Click Sa
ve to save the sengs aer the conguraon.
Card Reader
Main Car
d Reader
You can congure the device card reader's parameters.
Enable Card Reader
Aer enabling this funcon, the card reader can be used via card; Aering disabling this
funcon, the entrance card reader cannot be used via card.
Recognion Interval
Y
ou can set the interval between 2 connuous
recognion of a same person during the
authencaon. In the congured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Set Privacy Parameters
Set the event storage type, authencaon sengs, picture upload and storage parameters, and
the picture clearing parameters.
Go to Conguraon → Gener
al → Privacy
DS-K6300 Series Payment Terminal User Manual
69