User's Manual

9.5.8 Change Administrator's Password
Steps
1.
Click Conguraon → User Manag
ement .
2.
Click
.
3.
Enter the old password and create a new password.
4.
Conrm the new password.
5.
Click OK.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
chang
e the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
9.5.9 Online Users
The informaon of users logging into the device is shown.
Go t
o Conguraon → System → User Management → Online Users to view the list of online
users.
9.5.10 View Device Arming/Disarming Informaon
View device arming type and arming IP address.
Go t
o Conguraon → Arming/Disarming Informaon .
You can view the device arming/disarming informaon. Click R
efresh to refresh the page.
9.5.11 Network Sengs
Set TCP/IP, port, Wi-Fi parameters, and plaorm access.
Note
Some device models do not support Wi-Fi sengs. Refer to the actual products during
conguraon.
DS-K6300 Series Payment Terminal User Manual
64