User's Manual

Table Of Contents
Upgrade
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
Select an upgrade type from the drop-down list. Click and select the upgrade le from your
local PC. Click Upgrade to start upgrading.
If the device has been connected to Hik-Connect and network, when there is a new installaon
package in Hik-Connect, you can click Upgrade aer Online Update to upgrade the device system.
Note
Do not power o
during the upgrading.
9.5.6 Log Query
You can search and view the device logs.
Go t
o Conguraon → System → Maintenance → Log Query .
Set the major and minor type of the log type. Set the start me and end me for searching, and
click Search.
The results will be displayed below, which including the No., me, the major type the minor type,
the channel No., the local/remote user informaon, the remote host IP, etc.
9.5.7 Security Mode Sengs
Set the security mode for logging in the client soware.
On the Device for Management page, click Conguraon → S
ystem → Security → Security
Service .
Select a security mode from the drop-down list, and click Save.
Security Mode
High security level for user informaon vericaon when logging in the client soware.
Compable Mode
The user informaon
vericaon is compable with the old client soware version when
logging in.
Enable SSH
To raise network security, disable SSH service. The conguraon is only used to debug the
de
vice for the professionals.
Enable HTTP
In order to increase the network security level when vising websites, you can enable HTTP to
acquire a more secure and encrypted network communicaon environment. The
communicaon should authencated by identy and encrypon password aer enabling HTTP,
which is save.
DS-K6300 Series Payment Terminal User Manual
63