User's Manual

Table Of Contents
Parameter Descripon
Set the matching threshold when authencang via ECO mode 1:N
matching mode. The larger the value, the smaller the false accept rate
and the larger the false rejecon rate
Face with Mask
Detecon
Aer enabling the face with mask detecon, the system will recognize
the captured face with mask picture. You can set face with mask & face
1:N level and the strategy.
Reminder of Wearing
If the person do not wear a face mask when authencang, the
device prompts a nocaon and the door will open.
Must Wear
If the person do not wear a face mask when authencang, the
device prompts a nocaon and the door keeps closed.
Mulple Faces
Authencaon
Aer mulple faces authencaon is enabled, mulple faces
authencaon is supported.
6.8 Data Management
You can delete data, import data, and export data.
6.8.1 Delete Data
Delete user data.
On the Home pag
e, tap Data → Delete Data → User Data . All user data added in the device will be
deleted.
6.8.2 Import Data
Steps
1.
Plug a USB ash
drive in the device.
2.
On the Home page, tap Data → Import Data .
3.
Tap User Data, Face Data or Access Control Parameters .
Note
The imported access control parameters are conguraon
les of the device.
4.
En
ter the created password when you exported the data. If you do not create a password when
you exported the data, leave a blank in the input box and tap OK immediately.
DS-K6300 Series Payment Terminal User Manual
49