User's Manual

Table Of Contents
10.11.2 Set Picture Storage
The pictures, captured by the camera of video access control terminal, triggered by events, can be
saved in the PC running the iVMS-4200 Service. You can set the picture storage locaon here
manually
.
Steps
1.
Enter the System Conguraon module.
2.
Click E
vent Picture Storage.
3.
Set the Store Pictures in Server switch to on.
All the disks of the PC running the iVMS-4200 service will show.
4.
Select the disk to save the pictures.
Note
The default saving path is: Disk/iVMS-4200alarmPicture
5.
Click Sa
ve.
10.11.3 Set Alarm Sound
When the event is triggered, the client can give an audible warning to nofy the security
personnel. You can set the sound of the audible warning in this secon.
Steps
1.
Open the S
ystem Conguraon page.
2.
Click Alarm Sound tab to enter the Alarm Sound Sengs page.
3.
Oponal: Click
and select the audio les from the local path for dierent events.
4.
Oponal: Add customized alarm sound.
1) Click Add to add customized alarm sound.
2) Double click the Type eld to customize the alarm sound name as desired.
3) Click and select the audio les from the local path for dierent alarms.
5.
Oponal: Click for a
tesng of the audio le.
6.
Oponal: Click
in the Operaon column to delete the custom sound.
7.
Click Sa
ve.
Note
The format of the audio le can only be WAV.
10.11.4 Set Access Control and Video Intercom Parameters
You can congure the access control and video intercom parameters according to actual needs.
DS-K6300 Series Payment Terminal User Manual
142